F500SP Monitor Speakers By Fyne Audio

Fyne’s F500SP monitors are UK-built speakers that add a unique Special Production IsoFlare driver, tuned crossover, and premium BassTrax port system, all derived from the prestigious F700 series. This stand-mount loudspeaker’s 6” (150mm) IsoFlare driver delivers full-range, point source reproduction across the entire audio spectrum for outstanding detail and class-leading imaging. The multi-fiber cone has exceptional bass reproduction thanks to its innovative twin-magnet motor system and FyneFlute roll surround that reduces cone resonances at the driver termination. The low-frequency output is channeled through a down-firing port onto Fyne’s premium BassTrax Tractrix diffuser system, giving a smooth bass response and easy room integration. The bi-wire connection panel features a fifth terminal to ground the driver chassis and eliminate amp or cable-born RF interference. With enhanced details including anodized aluminum plinth, diamond-cut aluminum driver trim, and a deep gloss walnut veneer finish option, the F500SP is Fyne Audio’s most affordable premium UK-made loudspeaker.

Stand

Designed for the F500SP, the FS6 stand ensures optimum support for any small footprint compact loudspeaker. The heavy steel top plate is the perfect fit for the F500SP but remains wide enough for a number of standmount loudspeakers to take advantage of the FS6 stand design and benefits. The contoured central column is extruded from heavy gauge aluminum and can be further mass-loaded to improve damping. The chunky aluminum plate lower plinth takes its design cues from the F500 SP floorstanding models, integrating top adjustable spikes, knurled lock rings, and machined aluminum cups to protect hard floors.

System Type: 2 way, downwards firing port, with BassTraxTM Tractrix diffuser*
Recommended amplifier power (Watt RMS): 30 – 120
Continuous power handling (Watt RMS): 60
Sensitivity (2.83 Volt @ 1m): 90dB
Nominal impedance: 8 Ohm
Frequency response (-6dB typical in room): 42Hz – 34kHz
Drive unit complement: 1 x 150mm IsoFlare™ point source driver Multi-fibre bass / midrange cone, FyneFlute™ surround with 25mm magnesium dome compression tweeter, neodymium magnet system.
Crossover frequency: 1.7kHz
Crossover type: Bi-wired passive low loss, 2nd order low pass, 1st order high pass.
Dimensions – HxWxD: 323 x 200 x 320mm (12.7 x 7.9 x 12.6”)
Weight – Each: 8.1kg (17.6lbs)
Finishes: Piano Gloss Walnut / Piano Gloss Black / Piano Gloss White

Stand:

Stand Height – excluding spikes: 611mm (24.1″)
Stand Top Plate Dimensions: 160mm x 230mm (6.3 x 9.1″)
Base Plate Dimensions – WxD: 277mm x 350mm (10.9 x 13.8″)
Weight – Each: 6.5kg (14.3lbs)

Note: Price shown is for a pair of speakers.